Portable solutions for shooting from a prone position, off a table, up to a kneeling (or seated) position.

Lightweight supports designed for standing shots, and most can be set up for other positions.

More stable supports with a built in levelling system and rifle clamp for maximum accuracy.

Solid supports with a removable levelling system that can be swapped in seconds for a different use.

Solutions that are designed to work with any rifle

Solutions that are designed to work with Arca compatible rifles or tripods

Solutions that are designed to work with rifles with Picatinny Rails

Solutions that are designed to be attached to your rifle's sling stud

Vanguard provides a range of other accessories to make the most use of your rifle for different situations.

Options to attach to a support or head from any brand.

Lightweight padded bags to keep your rifle safe on the go.

Carry your rifle in comfort with these neoprene non-slips slings.

A range of optics to get closer to the action.

Here we try to address some of the common questions we get asked at shows. If you have a question that is missing, feel free to contact us at info@vanguardworld.co.uk

Will that Vanguard head fit on any gun rest?

If your current head can be removed from your support, the new Vanguard head should fit. There is a long established industry standard for attaching the head through either a 1/4" thread (for smaller, lighter supports) or a 3/8" thread (more commonly found on larger supports). Vanguard's heavier heads (such as the GM-70) have a 3/8" thread hole in the base and include an adaptor to make it fit the smaller 1/4" thread.  Please note that some heads designed for lighter supports (such as the U-Yoke) only have a 1/4" thread.  These can still be attached to most supports, but a few may need need you to use a tripod head as the quick release plate will always have a 1/4" thread.