Why use, and how to choose the right monopod?

Why use, and how to choose the right monopod?

November 17, 2026 , Vanguard World

There is a reason you see monopods lining football touchlines and wildlife hides: they take the weight of long lenses without pinning the photographer to one position and make it easier to follow fast moving subjects that can change direction in an instant. Here we share an overview of monopods in photography based on the insights that we’ve gained over the years to help you decide if one is right for you, what to look for in choosing a monopod, and where Vanguard monopods fit.

 

What is a monopod?

A monopod is a single leg camera support that takes much of the weight of a camera and lens while allowing the photographer to move and follow a subject more freely than with a tripod. It offers more support than handholding, but not the locked-off stability of a tripod.

 

Why use a monopod?

Where a tripod will always offer greater stability than a monopod, the monopod can offer different benefits. Clearly there are a lot of variables, such as leg diameter, material and leg length, but in the table below we give a simple summary.

Feature

Traditional Monopod

Tri-Foot Monopod

Travel Tripod

Full Sized Tripod

Lightweight

Excellent

Excellent

Excellent

Limited

Portable

Excellent

Excellent

Excellent

Limited

Setup Speed

Excellent

Excellent

Good

Good

Space Needed

Smallest

Small

Most

Most

Stability

Limited

Good

Excellent

Excellent

Tracking Movement

Excellent

Excellent

Good

Good

 

Where would a monopod be the best support?

1. When a tripod takes up too much space, such as sports side lines, concert venues, event seating and busy hides.

2. Following a fast-moving subject, such as a football being passed from player to player or a Formula 1 car screaming past, especially when it’s not just moving on a horizontal plane.

3. When you want to use a long lens over an extended period or in multiple locations to add support and minimise fatigue, without the weight and bulk of a full-sized tripod.

Example: Imagine photographing a football match with a 100–500mm lens. A tripod provides excellent support, but three legs take up valuable touchline space and make repositioning slower. A monopod transfers much of the weight to the ground to minimise fatigue, while allowing you to move rapidly as play switches ends.

 

Where would a tripod be the best support?

1. When you need stability over seconds or even minutes, such as long exposures in low light photography and timelapse photography.

2. Where exact composition and the ability to repeat a shot are key, such as product photography and timelapse photography.

3. When you need to avoid touching the camera altogether to avoid introducing movement, such as macro photography or astrophotography.

 

Do I still need a monopod if my camera or lens has image stabilisation?

This varies depending on your photoshoot. IS/IBIS can reduce camera shake, especially at higher shutter speeds, but it does not account for the weight of your camera over an extended period or longer exposures.

If you need to keep your camera pointed towards the subject area to catch a fleeting moment, such as at a concert, then even a lighter kit will start becoming uncomfortable over time. This is multiplied by the weight of a large telephoto setup. A monopod can offset the weight and keep you fresher for longer.

Light is also a crucial factor. A day that starts out sunny and bright can quickly darken across the course of even a short photoshoot, and in disciplines like wildlife photography it might be late in the evening before the subject appears. To offset the lower light, shutter speeds slow and, especially if using a telephoto lens, the importance of stability rises.

In both scenarios, your camera may deliver the result you need without using a support, but is it worth the risk of ruining a long planned shoot for the lack of a monopod, which will cost a fraction of your camera and lens? 

 

What types of monopod are available?

A traditional monopod is a single leg where the camera or lens can be attached directly to the monopod, or using an adaptor or tripod head to act as a quick release system or offer more control. The weight of the camera or lens is supported by the monopod to reduce unwanted movement, with a small contact point on the ground meaning that the aim can be adjusted with ease. 

A disadvantage of a traditional monopod is that lateral control is all by hand which can introduce movement into your shot, affect your levels and increase fatigue over extended photoshoots. A tri-foot monopod adds a small three-foot base to increase the contact on the ground. While this will not eliminate the risks highlighted, it does create a wider contact area and help deliver more controlled movement and reduce fatigue, while still offering the benefits of a traditional monopod using a fraction of the footprint of a tripod.  Please note however, that a tri-foot is not designed to hold your camera on it’s own and should not be left standing unattended with equipment attached.

Tip: When using a tri-foot monopod, you can place your foot on the nearest tri-foot and that can help keep the monopod in place and maximise control.

 

Do I need a head on my monopod?

No.  Most monopods come with a 1/4” thread that can be fitted directly into the base of your camera or long lens. This helps maximize the connection to the monopod, especially when using a long lens. If there are locking screws on the top of the monopod, then these can be tightened to ensure a solid grip that should not come loose.

That said, if the camera or lens is directly attached to the monopod then the lens will always follow the angle of the monopod, so having a means to control the level of the camera can make the monopod easier to use.  

A ball head adds the widest freedom of movement with the ability to move rapidly in almost any direction, though too much freedom can make the camera harder to control. To help slow the movement, especially when using a long lens, we would recommend a ball head with a friction control like the LB-S Series, or to make your budget go further you could look at the simpler traditional BH Series.

A 2-way pan head offers a handle to control the vertical tilt, but does not compensate for any sideways tilt.

A levelling adaptor like Vanguard’s Universal Levelling Adaptor Series can bridge the options, allowing the camera or lens to be fitted directly to the levelling platform and then tilt ±15° and rotate 360°

 

What should I look for in a monopod?

1. Enough height to work with comfortably without hunching over, especially during long events.

2. A realistic load capacity that comfortably exceeds the weight of your camera, lens and any head/adaptor. You could also look at the tube diameter as another indicator of strength and stability.

3. A foot/base design that meets your needs. A traditional monopod maximises portability while a tri-foot monopod offers additional stability and should fold away when not needed.

4. Your preferred material. Aluminium generally offers better value, while carbon fibre can reduce weight while retaining rigidity.

5. A mounting arrangement that suits how you prefer to attach your camera – directly to the monopod or levelling adaptor, or through the quick release system on a tripod head or adaptor.

6. Leg locks you can operate quickly and confidently in the conditions you normally shoot in. This is a subject in it’s own right and more information can be found in our blog – Twist locks vs lever locks.

 

What monopods are available from Vanguard?

We offer two series, the VEO 5 Monopod Series and the VESTA Monopod Series.

The VEO 5 Monopod Series is our premium carbon fibre series with easy clean twist locks and options that come with the levelling adaptor fitted:

VEO 5

CM-234TR

CM SPORT 23

CM-264TR

CM SPORT 26

Monopod Style

Tri-Foot

Tri-Foot

Tri-Foot

Tri-Foot

Foot Movement

Tilts ±18° and rotates 360°

Tilts ±18° and rotates 360°

Tilts ±18° and rotates 360°

Tilts ±18° and rotates 360°

Levelling System

-

Levelling Adaptor 45

-

Levelling Adaptor 45

Levelling Movement

-

Tilts ±15° and rotates 360°

-

Tilts ±15° and rotates 360°

Thread

1/4”

1/4”

1/4”

1/4”

Top Plate Diameter

45mm

47mm

45mm

47mm

Leg Diameter

23mm

23mm

26mm

26mm

Leg Sections | Locks

4 | Easy clean twist

4 | Easy clean twist

4 | Easy clean twist

4 | Easy clean twist

Material

Carbon fibre

Carbon fibre

Carbon fibre

Carbon fibre

Extended Height

150cm

154cm

162cm

166cm

Folded Height

55cm

59cm

55cm

59cm

Load Capacity

12kg

12kg

15kg

15kg

Weight

680g

820g

725g

865g

 

The VESTA Monopod Series is designed to focus on delivering exceptional value for money without compromising on performance. All models are aluminium with simple lever locks, and one model includes a fitted Arca compatible ball head:

VESTA

AM-204

AM-234TR

AM-234TRB

Monopod Style

Traditional

Tri-Foot

Tri-Foot

Foot Movement

-

Tilts ±18° and rotates 360°

Tilts ±18° and rotates 360°

Levelling System

-

-

BH-50 Arca compatible ball head

Levelling Movement

-

-

Tilts -90~45° and rotates 360°

Thread

1/4”

1/4”

1/4”

Top Plate Diameter

36mm

45mm

45mm

Leg Diameter

20mm

23mm

23mm

Leg Sections | Locks

4 | Lever

4 | Lever

4 | Lever

Material

Aluminium

Aluminium

Aluminium

Extended Height

140.5cm

150cm

159cm

Folded Height

44.5cm

50.5cm

59.5cm

Load Capacity

6kg

12kg

4.5kg

Weight

250g

760g

1065g

 

Can I use my monopod as a walking stick?

This is a question we are regularly asked at shows. In theory, yes. It is possible, but we would not recommend it. They may look similar, but a monopod is designed to hold the weight of a camera on top, and is not designed as a walking stick or trekking pole which has to cope with repeated downward and sideways forces from the user’s body weight, including sudden loads if the walker slips.

 

In summary

A monopod is a single leg camera support that helps carry the weight of a camera and lens while retaining much more freedom of movement than a tripod. Monopods are particularly useful for sports, wildlife and event photography, especially with heavier telephoto lenses or where there is not enough room for a tripod. A tripod remains the better option when maximum stability, long exposures or a fixed composition are required